Cisco ASR1000-RP1 - ASR 1000 Series Route Processor 1 Router Software Configuration Manual page 187

Chapter 4 Software Upgrade Process
Command or Action
Step 14
request platform software package install rp 0
file-system
file :asr1000rp1-esp*
force
Example:
Router# request platform software package
install rp 0 file
bootflash:asr1000rp1-esp*02.02.01.122-33.XNB1*.
pkg force
Step 15
request platform software package install rp 0
file-system
file :asr1000rp*
Example:
Router# request platform software package
install rp 0 file
bootflash:asr1000rp*02.02.01.122-33.XNB1*.pkg
Step 16
show version installed
Example:
Router# show version installed
Step 17
reload
Example:
Router# reload
Step 18
request platform software package clean
Examples
The following example shows the software upgrade for Cisco ASR 1002 or 1004 Router running
sub-packages:
Router# show version
Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVENTERPRISEK9-M), Version
12.2(33)XNA, RELEASE SOFTWARE (fc1)
<output removed for brevity>
System image file is "bootflash:packages.conf"
<output removed for brevity>
cisco ASR1004 (RP1) processor with 752142K/6147K bytes of memory.
5 Gigabit Ethernet interfaces
2 Serial interfaces
32768K bytes of non-volatile configuration memory.
4194304K bytes of physical memory.
937983K bytes of eUSB flash at bootflash:.
39004543K bytes of SATA hard disk at bootflash:.
253424K bytes of USB flash at usb0:.
Configuration register is 0x2102
Router# show version installed
OL-16506-10
version
*.pkg
version
*.pkg
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
Upgrade Process With Service Impact for Nonredundant Platforms
Purpose
Upgrade the ESP Base subpackage.
Upgrade all subpackages, including the RPBase
subpackage, which is the last subpackage that needs to be
upgraded.
This step is required to ensure that all subpackages
Note
on the router were upgraded as part of this
procedure, and might upgrade some subpackages
that would otherwise be missed in the process.
(Optional) Verify that the subpackages are properly
installed.
Reload the RP.
The router will continue normal operation even
Tip
without a reload, so you can reload the router during
scheduled maintenance or a slower traffic period.
(Optional) Removes the unused subpackages from the
router.
4-125