Cisco ASR1000-RP1 - ASR 1000 Series Route Processor 1 Router Software Configuration Manual page 229

Chapter 7 Configuring Call Home
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
Router# configure terminal
Step 2
call-home
Example:
Router(config)# call-home
Step 3
profile name
Example:
Router(config-call-home)# profile test
Step 4
active
Example:
Router(cfg-call-home-profile)# active
Step 5
no active
Example:
Router(cfg-call-home-profile)# no active
Step 6
end
Example:
Router(cfg-call-home)# end
Copying a Destination Profile
To create a new destination profile by copying an existing profile, complete the following steps:
SUMMARY STEPS
1.
2.
3.
OL-16506-10
configure terminal
call-home
copy profile source-profile target-profile
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
Purpose
Enters global configuration mode.
Enters call home configuration mode.
Enters call home destination profile configuration mode for
the specified destination profile. If the specified destination
profile does not exist, it is created.
Enables the destination profile. By default, a new profile is
enabled when it is created.
Disables the destination profile.
Exits call home destination profile configuration mode and
returns to privileged EXEC mode.
How to Configure Call Home
7-13