Viewing The Content Of The Trace Buffer - Cisco ASR1000-RP1 - ASR 1000 Series Route Processor 1 Router Software Configuration Manual

Chapter 13 Tracing and Trace Management

Viewing the Content of the Trace Buffer

To view the trace messages in the trace buffer or file, enter the show platform software trace message
privileged EXEC and diagnostic mode command.
In the following example, the trace messages for the Host Manager process in Route Processor slot 0 are
viewed using the show platform software trace message command:
Router# show platform software trace message host-manager R0
08/23 12:09:14.408 [uipeer]: (info): Looking for a ui_req msg
08/23 12:09:14.408 [uipeer]: (info): Start of request handling for con 0x100a61c8
08/23 12:09:14.399 [uipeer]: (info): Accepted connection for 14 as 0x100a61c8
08/23 12:09:14.399 [uipeer]: (info): Received new connection 0x100a61c8 on descriptor 14
08/23 12:09:14.398 [uipeer]: (info): Accepting command connection on listen fd 7
08/23 11:53:57.440 [uipeer]: (info): Going to send a status update to the shell manager in
slot 0
08/23 11:53:47.417 [uipeer]: (info): Going to send a status update to the shell manager in
slot 0
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
13-5
OL-16506-10