Software Upgrade Process
Cisco ASR 1000 Series Routers support the following software upgrade procedures:
In Service Software Upgrades (ISSU) for redundant platforms—The ISSU process allows software
•
to be updated or otherwise modified while packet forwarding continues with minimal interruption.
ISSU supports two different software upgrade modes:
–
–
The supported platforms include Cisco ASR 1006 and Cisco ASR 1013 Routers.
Upgrade process with service impact for nonredundant platforms—Non-hardware-redundant
•
chassis models (such as the Cisco ASR 1001 Router, Cisco ASR 1002 Router and Cisco ASR 1004
Router) do not support ISSU upgrade or downgrade. Instead subpackage software upgrade is
supported only if the router is running in subpackage mode.Traffic loss cannot be avoided during
the installation of the ESP package as a part of ISSU.
Table 4-1
platforms.
Table 4-1
Platform
ASR 1006 Routers
ASR 1013 Routers
ASR 1004 Routers
ASR 1002 Routers
ASR 1002-F Routers
ASR 1001 Routers
This chapter discusses various software upgrade procedures and contains the following sections:
ISSU Upgrade for Redundant Platforms, page 4-2
•
Upgrade Process With Service Impact for Nonredundant Platforms, page 4-75
•
OL-16506-10
Consolidated package mode
Subpackage mode
lists Compatiblity matrix of the software upgrade process for various ASR 1000 Series Router
Software Upgrade Compatibility Matrix for Various ASR Platforms
Consolidated Package
Supported
Supported
Not Supported
Not Supported
Not Supported
Not Supported
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
4
C H A P T E R
SubPackage
Supported
Supported
Supported
Supported
Supported
Supported
4-1
Need help?
Do you have a question about the ASR1000-RP1 - ASR 1000 Series Route Processor 1 Router and is the answer not in the manual?