Enabling And Disabling Call Home - Cisco ASR1000-RP1 - ASR 1000 Series Route Processor 1 Router Software Configuration Manual

Chapter 7 Configuring Call Home
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
Router# configure terminal
Step 2
call-home
Example:
Router(config)# call-home
Step 3
rate-limit number
Example:
Router(cfg-call-home)# rate-limit 40

Enabling and Disabling Call Home

To enable or disable the Call Home feature, complete the following steps:
SUMMARY STEPS
1.
2.
3.
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
Router# configure terminal
Step 2
service call-home
Example:
Router(config)# service call-home
Step 3
no service call-home
Example:
Router(config)# no service call-home
OL-16506-10
configure terminal
service call-home
no service call-home
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
Purpose
Enters global configuration mode.
Enters call home configuration mode.
Specifies a limit on the number of messages sent per
minute. Range 1 to 60. The default is 20.
Purpose
Enters global configuration mode.
Enables the Call Home feature.
Disables the Call Home feature.
How to Configure Call Home
7-21