Setting A Tracing Level - Cisco ASR1000-RP1 - ASR 1000 Series Route Processor 1 Router Software Configuration Manual

om
peer
qos
route-map
sbc
services
sw_wdog
tdl_acl_config_type
tdl_acl_db_type
tdl_cdlcore_message
tdl_cef_config_common_type
tdl_cef_config_type
tdl_dpidb_config_type
tdl_fman_rp_comm_type
tdl_fman_rp_message
tdl_fw_config_type
tdl_hapi_tdl_type
tdl_icmp_type
tdl_ip_options_type
tdl_ipc_ack_type
tdl_ipsec_db_type
tdl_mcp_comm_type
tdl_mlp_config_type
tdl_mlp_db_type
tdl_om_type
tdl_ui_message
tdl_ui_type
tdl_urpf_config_type
tdllib
trans_avl
uihandler
uipeer
uistatus
urpf
vista
wccp

Setting a Tracing Level

To set a tracing level for any module on the Cisco ASR 1000 Series Routers, or for all modules within a
process on the Cisco ASR 1000 Series Router, enter the platform software trace privileged EXEC and
diagnostic mode command.
In the following example, the trace level for the forwarding processor module in the Forwarding
Manager of the ESP processor in slot 0 is set to the informational tracing level (info):
Router(config)# platform trace runtime slot F0 bay 0 process forwarding-manager module
interfaces level info
In the following example, the trace level for the forwarding processor module in the Forwarding
Manager of the ESP processor in slot R0 is set to the informational tracing level (max):
Router(config)# platform trace boottime slot R0 bay 1 process forwarding-manager
forwarding-manager level max
See the platform trace boottime process forwarding-manager moduleinterfaces and platform trace
runtime process forwarding-manager moduleinterfaces command reference for additional
information about the options for this command.
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
13-4
Notice
Notice
Notice
Notice
Notice
Notice
Notice
Notice
Notice
Notice
Notice
Notice
Notice
Notice
Notice
Notice
Notice
Notice
Notice
Notice
Notice
Notice
Notice
Notice
Notice
Notice
Notice
Notice
Notice
Notice
Notice
Notice
Notice
Notice
Notice
Notice
Chapter 13 Tracing and Trace Management
OL-16506-10