Declare And Authenticate A Ca Trustpoint - Cisco ASR1000-RP1 - ASR 1000 Series Route Processor 1 Router Software Configuration Manual

How To Configure Call Home to Support the Smart Call Home Service
Command or Action
Step 10
exit
Example:
Router(config)# exit
Step 11
copy running-config startup-config
Example:
Router# copy running-config startup-config

Declare and Authenticate a CA Trustpoint

To establish communication with the Cisco HTTPS server for Smart Call Home service, you must
declare and authenticate the Cisco server security certificate.
SUMMARY STEPS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
Router# configure terminal
Step 2
crypto pki trustpoint name
Example:
Router(config)# crypto pki trustpoint cisco
Step 3
enrollment terminal
Example:
Router(ca-trustpoint)# enrollment terminal
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
7-28
configure terminal
crypto pki trustpoint name
enrollment terminal
exit
crypto pki authenticate name
At the prompt, paste the security certificate text.
quit
yes
end
copy running-config startup-config
Purpose
Exits global configuration mode and returns to privileged
EXEC mode.
Saves the configuration to NVRAM.
Purpose
Enters global configuration mode.
Declares a CA trustpoint on your router and enters CA
trustpoint configuration mode.
Specifies a manual cut-and-paste method of certificate
enrollment.
Chapter 7 Configuring Call Home
OL-16506-10