C H A P T E R 3 Consolidated Packages And Subpackages Management; Running The Cisco Asr 1000 Series Routers: A Summary - Cisco ASR1000-RP1 - ASR 1000 Series Route Processor 1 Router Software Configuration Manual

Chapter 3 Consolidated Packages and SubPackages Management
A Cisco ASR 1000 Series Router configured to run using a consolidated package does have some
advantages over a Cisco ASR 1000 Series Router configured to run individual subpackages. First, a
consolidated package can be booted and utilized using TFTP or another network transport method.
Secondly, configuring the router to use the one consolidated package file is easier than managing several
individual subpackage files. Running the router using a consolidated package may be the right method
of running the router in certain networking environments.
The consolidated package should be stored on bootflash:, usb[0-1]:, or a remote file system when this
method is used to run the router.

Running the Cisco ASR 1000 Series Routers: A Summary

This section summarizes the advantages and disadvantages of each method of running your Cisco ASR
1000 Series Routers.
The advantages of running your router using individual subpackages include:
•
The advantages of running your router using a consolidated package include:
•
•
Table 3-1
OL-16506-10
Optimizes router memory usage—When the router is booting using the individual and optional
subpackage method, software image content from the Router Processor (RP) is copied into memory
on an as-needed basis only, which conserves memory for other router processes. The router boots
fastest and allows for the highest peak traffic load when booted using the individual subpackage boot
approach.
Simplified installation—Only one software file needs to be managed instead of several separate
images.
Storage—A consolidated package, unlike individual subpackages, can be used to run the router
while being stored in bootflash:, on a USB Flash disk, or on a network server. A consolidated
package can be booted and utilized using TFTP or another network transport method, while the
individual subpackage method requires the individual subpackage files to be copied into the
bootflash: file directory on the router.
summarizes the advantages and disadvantages of the approaches.
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
Running the Cisco ASR 1000 Series Routers: An Overview
3-3