Cisco ASR1000-RP1 - ASR 1000 Series Route Processor 1 Router Software Configuration Manual page 144

Upgrade Process With Service Impact for Nonredundant Platforms
Command or Action
Step 9
issu loadversion rp 0 file
file-system
:asr1001-{rpaccess,rpios,rpcontrol}*
n-string
*.pkg bay
Example:
Router# issu loadversion rp 0 file
bootflash:asr1001-{rpaccess,rpios,rpcontrol}*03.02.
01.S.151-1.S1_2*.pkg bay 1 force
Step 10
issu commitversion
Example:
Router# issu commitversion
Step 11
redundancy force-switchover
Example:
Router# redundancy force-switchover
Step 12
show platform
Example:
Router# show platform
Step 13
issu loadversion rp 0 file
file-system:asr1001-{rpaccess,rpios,rpcontrol}*vers
ion-string*.pkg bay standby-bay force
Example:
Router# issu loadversion rp 0 file
bootflash:asr1001-{rpaccess,rpios,rpcontrol}*03.02.
01.S.151-1.S1_2*.pkg bay 0 force
Step 14
issu commitversion
Example:
Router# issu commitversion
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
4-82
standby-bay
force
Purpose
Upgrade the RPAccess, RPIOS, and RPControl
versio
subpackages in the standby bay.
Once the SSO state is reached, commit the software
version.
Force a switchover from the active IOS process to the
standby IOS process.
Your connection to the router often drops and is
Note
expected behavior at this point of the procedure
in many scenarios.
If this step drops your connection to the router,
wait a few minutes before reconnecting to the
router and then continue to
(Optional) Monitor system state to ensure both IOS
processes are active.
Upgrade the RPAccess, RPIOS, and RPControl
subpackages in the standby bay (a different bay than in
Step 9).
Commit the software version.
Chapter 4 Software Upgrade Process
Step 12.
OL-16506-10