Chapter 2
Catalyst 3750 Switch Cisco IOS Commands
clear l2protocol-tunnel counters
Use the clear l2protocol-tunnel counters privileged EXEC command to clear the protocol counters in
protocol tunnel ports.
Syntax Description
interface-id
Defaults
No default is defined.
Command Modes
Privileged EXEC
Command History
Release
12.2(25)SE
Usage Guidelines
Use this command to clear protocol tunnel counters on the switch or on the specified interface.
Examples
This example shows how to clear Layer 2 protocol tunnel counters on an interface:
Switch# clear l2protocol-tunnel counters gigabitethernet0/3
Related Commands
Command
show l2protocol-tunnel
OL-8552-07
clear l2protocol-tunnel counters [interface-id]
(Optional) Specify interface (physical interface or port channel) for which
protocol counters are to be cleared.
Modification
This command was introduced.
Description
Displays information about ports configured for Layer 2 protocol
tunneling.
Catalyst 3750 Switch Command Reference
clear l2protocol-tunnel counters
2-81