Clear Ptp Counters - Cisco Nexus 3548 Command Reference Manual

clear ptp counters

clear ptp counters
To clear the Precision Time Protocol (PTP) packet counters, use the clear ptp counters command.
Syntax Description
all
interface
ethernet slot/port
Command Default None
Command Modes EXEC mode
Command History Release
6.0(2)A1(1)
Usage Guidelines This command does not require a license.
Examples This example shows how to clear all PTP counters:
switch# clear ptp counters all
switch#
Related Commands Command
feature ptp
show running-config
ptp
Cisco Nexus 3548 Switch NX-OS System Management Command Reference
30
clear ptp counters {all | interface ethernet slot/port}
Clears all PTP counters.
Clears PTP counters from an interface.
Clears PTP counters from an IEEE 802.3z Ethernet interface. The slot
number is from 1 to 255 and the port number is from 1 to 128.
Modification
This command was introduced.
Description
Enables PTP on the switch.
Displays the PTP running system configuration information.
System Management Commands
OL-27851-02