Clear L2Protocol-Tunnel Counters - Cisco Catalyst 3750 Metro Command Reference Manual

Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands

clear l2protocol-tunnel counters

Use the clear l2protocol-tunnel counters privileged EXEC command to clear the protocol counters in
protocol tunnel ports.
Syntax Description interface-id
Defaults
No default is defined.
Command Modes
Privileged EXEC
Command History Release
12.1(14)AX
Usage Guidelines
Use this command to clear protocol tunnel counters on the switch or on the specified interface.
Examples
This example shows how to clear Layer 2 protocol tunnel counters on a port:
Switch # clear l2protocol-tunnel counters gigabitethernet1/0/2
You can verify that the information was deleted by entering the show l2protocol-tunnel privileged
EXEC command.
Related Commands Command
show l2protocol-tunnel
OL-9645-10
clear l2protocol-tunnel counters [interface-id]
(Optional) Specify interface for which protocol counters are to be cleared.
The interface can be a physical interface or a port channel.
Modification
This command was introduced.
Description
Displays information about ports configured for Layer 2 protocol
tunneling.
Catalyst 3750 Metro Switch Command Reference
clear l2protocol-tunnel counters
2-47