Clear L2Protocol-Tunnel Counters - Cisco ME 3400 Command Reference Manual

clear l2protocol-tunnel counters

clear l2protocol-tunnel counters
Use the clear l2protocol-tunnel counters privileged EXEC command to clear the protocol counters in
protocol tunnel ports.
This command is supported only when the switch is running the metro IP access or metro access image.
Syntax Description
interface-id
Defaults
No default is defined.
Command Modes Privileged EXEC
Command History Release
12.2(25)EX
Usage Guidelines Use this command to clear protocol tunnel counters on the switch or on the specified interface.
Examples This example shows how to clear Layer 2 protocol tunnel counters on an interface:
Switch# clear l2protocol-tunnel counters gigabitethernet0/2
Related Commands Command
show l2protocol-tunnel
Cisco ME 3400 Ethernet Access Switch Command Reference
2-44
clear l2protocol-tunnel counters [interface-id]
(Optional) Specify interface (physical interface or port channel) for which
protocol counters are to be cleared.
Modification
This command was introduced.
Chapter 2 Cisco ME 3400 Ethernet Access Switch Cisco IOS Commands
Description
Displays information about ports configured for Layer 2 protocol
tunneling.
OL-9640-10