Emv Processing Configuration File Type - Magtek DynaFlex II Go Programmer's Manual

4 - Data Types and Shared TLV Data Objects
Tag Len
DF09 01 Default TAC supported when regular TACs are not present B
DF73 05 Default TAC default
DF74 05 Default TAC denial
DF75 05 Default TAC online
DF53 01 Random Transaction Selection not supported
DF54 01 Velocity Checking not supported
DF7C 01 CDA Mode
4.9

EMV Processing Configuration File Type

The host uses Command 0xD812 - Start Send File to Device (Unsecured) to load this file type to
control the behavior of the device's EMV kernels. The host must compile a single instance of this file
type containing multiple instances of the AID Delimiter Container, one for each contact or contactless
AID the device should support. For each instance of the AID Delimiter Container where tag 9F01 is set
to a contactless AID, the host must load a corresponding instance of an Entry Point Table when it loads
the EMV Entry Point Configuration File Type .
Table 4.9-1 - EMV Configuration Processing File Type
Tag Len
File Type Version
One byte indicating the version of the file type format being used.
•
0xAA
SHA-1 Hash
20 byte hash of all values that follow.
AID Delimiter Container
There can be multiple instances of this in sequence. The
FF33 var contents of the first instance are loaded into Processing
Table Slot 1, the contents of the second are loaded into
Processing Table Slot 2, etc.
DynaFlex II Go| Secure Card Reader | Programmer's Manual (COMMANDS)
Value / Description
Value / Description
Page 62 of 301 (D998200597-102)
Typ Req Example
R 01
00 00 00
B R
00 00
00 00 00
B R
00 00
00 00 00
B R
00 00
B R 00
B R 00
B R 01
Typ Req Example
T R