Property 2.3.1.2.1.5 Battery Charger Status - Magtek DynaFlex II Go Programmer's Manual

8 - Configuration
Table 8-202 - Get Request Example
AA00 8104 0155D101 840F D101 8501 02 8704 03010201 8902 C400
Table 8-203 - Get Response Example
AA00 81048255D101 820400000000 84820010 D101 850102 870403010201 8903 C401 64

8.6.3.5 Property 2.3.1.2.1.5 Battery Charger Status

Table 8-204 - Property 2.3.1.2.1.5 Battery Charger Status
Property OID 2.3.1.2.1.5 / 0x020301020105
Name Battery Charger Status
Description The device uses this property to report the status of the battery charger.
Securing Key None
Min. Len (b) 1
Max. Len (b) 1
Data Type Binary
0x00 = Precharge
0x01 = Fast charge – constant current
0x02 = Fast charge – constant voltage
Valid Values
0x03 = End of charge
0x04 = Charge complete
0xFF = No external power supplied
Default None
Table 8-205 - Get Request Example
AA00 8104 0155D101 840F D101 8501 02 8704 03010201 8902 C500
Table 8-206 - Get Response Example
AA00 81048255D101 820400000000 84820010 D101 850102 870403010201 8903 C501 04
DynaFlex II Go| Secure Card Reader | Programmer's Manual (COMMANDS)
Example (Hex)
Example (Hex)
Property Description
Example (Hex)
Example (Hex)
Page 283 of 301 (D998200597-102)