Magtek DynaFlex II Go Programmer's Manual page 4

Rev Number Date Notes
User Interface Host Action Request and 8.3.1.2 Property
1.2.1.1.1.2 Application Selection Behavior;
Add support for Mifare Classic 1K and 4K - 6.2.2 Command
0x1101 – Pass Through Command For Mifare Classic;
Update Key Injection Sequence in Command 0xEF01 - Load
Key Using TR-31 added Table 6.9-7 - Device Key ID / Slot;,
Misc. clarifications and corrections.
Add Section 8.4.1.4 Property 2.1.2.1.2.4 Boot0 Firmware
Part Number; Update section 4.3 Display Strings to include
missing strings. Add reference to Command 0xE001 - Get
Challenge to Command 0xEF01 - Load Key Using TR-31,
Update Table 4.17-6 - Key Slot IDs, change ID from 200x to
, Update 4.17.1.1.1 DUKPT Slot IDs with
0x2000 to 0x201F
TR31 Module support from 16 to 32 and Slot IDs to 0x2000 to
Table 8.6-4 - Property 2.3.1.1.1.2 Transaction
0x201F, Update
Key Status Property 2.3.1.2.1.6
with updated Valid Values, Add
Device Temperature Property 1.2.7.1.4.1 Device Low
. Add
Temperature Notification Level Property 1.2.7.1.4.2
. Add
Device High Temperature Notification Level Property
. Add
1.2.7.1.4.3 Device Temperature Notification Repeat Interval
.
Add Section 6.2.3 Command 0x1102 – Pass Through Command
4
For Mifare DESFire Light, Type , Update section 7.1.1
Notification 0x0101 - Transaction Information Update to include
Mifare DESfire info, Update section 7.3.1 Notification 0x1001 -
Device Information Update to include Mifare DESFire info, Add
Property 1.1.1.1.1.10 Google Smart Tap Collector ID Slot 1
Property 1.1.1.1.1.15 Google Smart Tap Collector ID
through
Slot 6 Property 1.1.1.1.1.1A Google Smart Tap POS
. Add
102 April 30, 2024
Capabilities Notification 0x0101
.Add Google Smart Tap to –
Transaction Information Update
. Add Google Smart Tap data to
EMV ARQC Type EMV Batch Data Type
and . Add
Property 1.2.2.2.1.2 USB Configuration Type
; Changed
Property 1.2.2.3.1.1 Bluetooth LE Device Name
default value;
Add Property 1.1.1.1.1.D Apple iAP2 AppBundleID; Add
Property 1.2.2.3.1.D Bluetooth LE Debug Mode Enabled ;
Revised 5.1.1 MACs for EMV Data to add AES method and
simplified TDES MACing spec by referencing ANSI x9.24;
Add Command 0x1805 - Buzzer and update Notification
0x1805 - User Interface Operation Complete to include
Buzzer result info, add Property 1.2.1.1.3.1 Contactless Low
Power Card Detect (Contactless Only), Clarified max
number of leading unmasked characters Property 1.1.2.2.1.3
PAN Number of Leading Unmasked Characters ; Added
Appendix G - Physical Button (DynaFlex Only); Added low
battery error to Table 3.2-4 in Response Message; Added
event notifications are disabled when battery is 5% or less in
Property 1.2.7.1.2.1 User Event Notification Controls
Enable; Changed Property 1.2.2.3.1.C Bluetooth LE Sleep
Enabled default to enabled, made it customer facing and added
DynaFlex II Go| Secure Card Reader | Programmer's Manual (COMMANDS)
Page 4 of 301 (D998200597-102)