Property 2.3.1.1.2.3 Tamper Sensor Tampered - Magtek DynaFlex II Go Programmer's Manual

8 - Configuration

8.6.2.3 Property 2.3.1.1.2.3 Tamper Sensor Tampered

Table 8.6-13 - Property 2.3.1.1.2.3 Tamper Sensor Tampered
Property OID 2.3.1.1.2.3 / 0x020301010203
Name Tamper Sensor Tampered
The device uses this property to report whether a tamper sensor has tampered. A device
Description
that is operating normally should not reported that it has been tampered with.
Securing Key None
Min. Len (b) 1
Max. Len (b) 1
Data Type Binary
0x00 = Not Tampered
Valid Values
0x01 = Tampered
Default None
Table 8.6-14 - Get Request Example
AA00 8104 0155D101 840F D101 8501 02 8704 03010102 8902 C300
Table 8.6-15 - Get Response Example
AA00 81048255D101 820400000000 84820010 D101 850102 870403010102 8903 C301 00
DynaFlex II Go| Secure Card Reader | Programmer's Manual (COMMANDS)
Property Description
Example (Hex)
Example (Hex)
Page 279 of 301 (D998200597-102)