Property 1.2.2.3.1.6 Bluetooth Le Connection Parameter Update Request Control - Magtek DynaFlex II Go Programmer's Manual

8 - Configuration
Min. Len (b) 2
Max. Len (b) 2
Data Type Binary
Valid Values 0x00 0x0A (10) - 0x0C 0x80 (3200) MSB first
Default 0x01 0xF4 (5000 milliseconds)
Table 8.3-56 - Get Request Example
AA00 81040128D101 841AD101 81072B06010401F609 850101 890AE208E206E304E102C500
Table 8.3-57 - Get Response Example
AA0081048232D1018204000000008482001CD10181072B06010401F609850101890CE20AE208E30
6E104C50201F4
Table 8.3-58 - Set Request Example
AA0081040112D111841CD11181072B06010401F609850101890CE20AE208E306E104C50201F4
Table 8.3-59 - Set Response Example
AA0081048212D1118204000000008482001CD11181072B06010401F609850101890CE20AE208E30
6E104C50201F4

8.3.3.6 Property 1.2.2.3.1.6 Bluetooth LE Connection Parameter Update Request Control

Table 8.3-60 - Property 1.2.2.3.1.6 Bluetooth LE Connection Parameter Update Request Control
Property OID 1.2.2.3.1.6 / 0x010202030106
Name Bluetooth LE Connection Parameter Update Request Control
The device uses this property to determine if the Bluetooth LE connection parameter
update request control is enabled. When it is enabled, the device sends a connection
parameter update request once after each Bluetooth LE connection.
Description
After the host changes this property, the device must be reset before the changes will
take effect.
Securing Key None
Min. Len (b) 1
DynaFlex II Go| Secure Card Reader | Programmer's Manual (COMMANDS)
Property Description
Example (Hex)
Example (Hex)
Example (Hex)
Example (Hex)
Property Description
Page 221 of 301 (D998200597-102)