Notifications; Notification Source 0X01Nn - Notifications From Transactions; Notification 0X0101 - Transaction Information Update - Magtek DynaFlex II Go Programmer's Manual

7 - Notifications

7 Notifications
This section provides definitions and practical information about Notification Messages, which follow
the format described in section 3.2.2.3. To find documentation about a specific notification:
1) Use the Notification Source byte in the message to find the Notification Source subsection below.
For example, Notification Source 0x01 Transaction leads to subsection 7.1 Notification Source
0x01nn - Notifications from Transactions.
2) Within that subsection, use the Notification Source byte plus the Notification Type byte in the
message to find the Notification subsection. For example, Notification Source 0x01 Transaction
plus Notification Type 0x01 Information Update leads to Notification 0x0101 - Transaction
Information Update.
3) Within that subsection, use the four bytes of Notification Detail Code in the message to look up the
notification in the Notification Detail Code table. For example, 0x07080302 leads to a row in Table
7.1-1 that provides practical information about what event led to the notification, and how to interpret
the Notification Payload.
7.1

Notification Source 0x01nn - Notifications from Transactions

7.1.1 Notification 0x0101 - Transaction Information Update

This notification reports information about progress and state changes that occur during a transaction.
For this notification, Notification Detail described in section 3.2.2.3 Notification Message contains one
byte each, shown in Table 7.1-1, to indicate:
•
The Payment Technology (PT) involved
•
The Reason (Rsn) for the notification
•
Detail (Det) about the notification that has different meanings depending on the Reason, and
•
An Extra field (Ext) that has different meanings depending on the Reason.
Table 7.1-1 - Notification Detail Codes
PT Rsn Det Ext
Payment Technology 0x08 Magnetic Stripe Reader (MSR) contains transaction notification detail
codes involving magnetic stripe cards (MSR Only).
•
Reason 0x01 = Card Event
•
Reason 0x08 = Data Update
•
Reason 0x10 = State Update
08 01 01 00 MSR, Card Event, Swiped, Reserved (MSR Only)
08 01 02 00 MSR, Card Event, Inserted, Reserved (MSR Only)
08 01 03 00 MSR, Card Event, Removed, Reserved (MSR Only)
08 01 04 00 MSR, Card Event, Detected, Reserved
08 08 02 02
DynaFlex II Go| Secure Card Reader | Programmer's Manual (COMMANDS)
MSR, Data Update, ARQC Update (Quick Chip), Data Attached
In this case, the device includes additional data, defined in Table 7.1-2, in the
Notification Payload portion of the Notification Message (MSR Only).
Page 152 of 301 (D998200597-102)
Meaning