Property 1.2.2.3.1.A Bluetooth Le Never Advertise - Magtek DynaFlex II Go Programmer's Manual

8 - Configuration
Table 8.3-79 - Set Response Example
AA0081048212D11182040000000084820020D11181072B06010401F6098501018910E20EE20CE30A
E108C906303132333435
8.3.3.10

Property 1.2.2.3.1.A Bluetooth LE Never Advertise

Table 8.3-80 - Property 1.2.2.3.1.A Bluetooth LE Never Advertise
Property OID 1.2.2.3.1.A / 0x01020203010A
Name Bluetooth LE Never Advertise
The device uses this property to determine if the Bluetooth LE Never Advertise is
enabled. When it is enabled, the device never advertises. This mode may be useful for
operators who only want to use the USB interface and don't want the device to advertise.
Description
After the host changes this property, the device must be reset before the changes will
take effect.
Securing Key None
Min. Len (b) 1
Max. Len (b) 1
Data Type Binary
0x00 (Disabled)
Valid Values
0x01 (Enabled)
Default 0x00 (Disabled)
Table 8.3-81 - Get Request Example
AA00 81040128D101 841AD101 81072B06010401F609 850101 890AE208E206E304E102CA00
Table 8.3-82 - Get Response Example
AA0081048232D1018204000000008482001BD10181072B06010401F609850101890BE209E207E305
E103CA0100
Table 8.3-83 - Set Request Example
AA0081040112D111841BD11181072B06010401F609850101890BE209E207E305E103CA0100
DynaFlex II Go| Secure Card Reader | Programmer's Manual (COMMANDS)
Example (Hex)
Property Description
Example (Hex)
Example (Hex)
Example (Hex)
Page 226 of 301 (D998200597-102)