Property 2.1.2.1.2.4 Boot0 Firmware Part Number - Magtek DynaFlex II Go Programmer's Manual

8 - Configuration

8.4.1.4 Property 2.1.2.1.2.4 Boot0 Firmware Part Number

Table 8.4-10 - Property 2.1.2.1.2.4 Boot0 Firmware Part Number
Property Description
Property OID 2.1.2.1.2.4 / 0x020102010204
Name Boot 0 Firmware Part Number
The device uses this property to report its bootloader firmware part number as a string,
Description
padded with null characters.
Securing Key None
Min. Len (b) 11
Max. Len (b) 11
Data Type Alphanumeric
Valid Values Any string
Default
Table 8.4-11 - Get Request Example
Example (Hex)
AA 00 81 04 01 0A D1 01 84 1A D1 01 81 07 2B 06 01 04 01 F6 09 85 01 02 89 0A E1 08 E2 06 E1 04
E2 02 C4 00
Table 8.4-12 - Get Response Example
Example (Hex)
AA 00 81 04 82 0A D1 01 82 04 00 00 00 00 84 82 00 25 D1 01 81 07 2B 06 01 04 01 F6 09 85 01 02
89 15 E1 13 E2 11 E1 0F E2 0D C4 0B 31 30 30 30 30 30 37 35 33 35 00
DynaFlex II Go| Secure Card Reader | Programmer's Manual (COMMANDS)
Page 246 of 301 (D998200597-102)