Property 1.2.7.1.1.4 Auto Reset Configuration - Magtek DynaFlex II Go Programmer's Manual

8 - Configuration
Table 8.3-113 - Set Request Example
AA 00 81 04 01 55 D1 11 84 10 D1 11 85 01 01 87 04 02 07 01 01 89 03 C1 01 05
Table 8-115 - Set Response Example
AA 00 81 04 82 55 D1 11 82 04 00 00 00 00 84 82 00 10 D1 11 85 01 01 87 04 02 07 01 01 89 03 C1
01 05

8.3.5.4 Property 1.2.7.1.1.4 Auto Reset Configuration

Table 8.3-114 - Property 1.2.7.1.1.4 Auto Reset Configuration
Property OID 1.2.7.1.1.4 / 0x010207010104
Name Auto Reset Configuration
This property controls the device's auto reset feature. The auto reset feature can be
configured such that the device automatically resets 23 hours after booting up or at a
specific time of day. The auto-reset feature cannot be disabled.
Description
See 24 Hour Automatic Reset PCI Requirement for more information.
Changes to this property do not take effect until the device is power cycled or reset.
Securing Key None
Min. Len (b) 2
Max. Len (b) 2
Data Type Binary
First byte 0 - 23 hours and second byte 0 - 59 minutes = Reset at the time of day
specified. The time of day specified should be 24-hour Universal Time Coordinated
(UTC). For example, values of 0 0 would be 12:00am UTC and values of 23 59 (0x17
Valid Values
0x3B) would be 11:59pm UTC.
First byte 0xFF and second byte 0xFF = Auto reset 23 hours after booting up.
Default 0xFF 0xFF
Table 8.3-115 - Get Request Example
AA00 8104 0155D101 840F D101 8501 01 8704 02070101 8902 C400
Table 8.3-116 - Get Response Example
AA0081048255D10182040000000084820011D1018501018704020701018904C402FFFF
DynaFlex II Go| Secure Card Reader | Programmer's Manual (COMMANDS)
Example (Hex)
Example (Hex)
Property Description
Example (Hex)
Example (Hex)
Page 234 of 301 (D998200597-102)