Magtek DynaFlex II Go Programmer's Manual page 155

7 - Notifications
Tag Len
Beginning of Notification Message found on page 39
0101 = DynaPro Format Transaction Data
84 var Transaction Data
EMV ARQC Type data blob, if the notification is an ARQC
Update (Quick Chip) notification.
EMV Batch Data Type data blob, if the notification is a
Batch Data notification.
/null (v)
Decoded raw barcode data, if the notification is a Barcode
event notification. If the barcode data is Base64 encoded, the
device sends the decoded version in binary format.
NFC UID Type reports the unique ID from the NFC tag
(EMV Contactless Only)
End of Notification Message found on page 39
Table 7.1-3 - Notification Payload for Barcode Reader, Barcode Event, Type (Encrypted Data Attached)
Tag Len
Beginning of Notification Message found on page 39
1805 = User Interface Operation Complete
84 var Notification Payload
Encrypted Data Primitive
Decrypt the value of this TLV data object using the
/DFDF59 var algorithm and variant specified in the Encrypted Data KSN
parameter and the Encrypted Data Encryption Type
parameter to read its contents. The format of the decrypted
data is shown in Table 7.1-4.
/DFDF50 var Encrypted Data KSN
Encrypted Data Encryption Type
/DFDF51 01
See section 4.4 Encryption Type for a list of valid values.
End of Notification Message found on page 39
Table 7.1-4 - Notification Payload for Barcode Reader, Barcode Event, Type, Data Attached (Unencrypted
Data)
Tag Len
FC var Barcode Data Container
/DF74 var Barcode Data
DynaFlex II Go| Secure Card Reader | Programmer's Manual (COMMANDS)
Value / Description
Value / Description
Value / Description
Page 155 of 301 (D998200597-102)
Typ Req Default
B R
B O
Typ Req Default
B R
B R
B R
B R
Typ Req Default
T R
B O