How To Use Keys - Omron E5EK PROGRAMMABLE TYPE User Manual

CHAPTER 1 INTRODUCTION
J How to use keys
key
F
RUN/RST
key
F
key
F
1--4
The following describes basic key operations.
To change to run operation from the reset status, press this key for one
second minimum.
To change to the reset status from run operation, press this key for two
seconds minimum.
The functions of this key change according to how long it is pressed. If
the key is pressed for less than one second, the parameters are switched.
If the key is pressed for one second minimum, the menu display ap-
pears. In key operations from here on, "press the key" refers to pressing
the key for less than one second.
For details on switching of parameters and menu display items, see
page 1-10.
Each press of key increments or advances the values or settings on
the No.2 display, while each press of the
the values or settings on the No.2 display.
Functions vary, for example, when the
taneously with the
tails, see page 1-10. Also, chapters 3 and 4 describe examples using vari-
ous key combinations.
key decrements or returns
RUN/RST
key, or a key is held down continuously. For de-
key is held down simul-