Omron E5EK PROGRAMMABLE TYPE User Manual page 97

Pattern No.
• This parameter can be set only when the controller is reset.
• Displays the execution pattern during program operation, and the set pattern
after the controller is reset.
Function
• This parameter can also be used in the program mode.
Setting Range
Setting
F Related description
3.5 Setting Patterns (page 3-14)
F Related parameters
See
All parameters in the program mode
Step No. monitor
• Monitors the current step No. (This parameter is reset to "0" when the controller
is reset.)
Function
0 to Number of steps-1
Monitor
F Related description
4.4 Program Operation (page 4-13)
F Related parameters
See
"Hold" "Advance" (level 0 mode)
Unit
0 to 3 None
Monitor Range
Level 0 Mode
Default
0
Unit
None
5--7