How To Use Keys - Omron e5ck User Manual

CHAPTER 1 INTRODUCTION
JHow to use keys
F
key
RUN/RST
F
key
F
key
1–4
The following describes basic key operations.
To change to run operation from the reset status, press this key for one se
cond minimum.
To change to the reset status from run operation, press this key for two se
conds minimum.
The functions of this key change according to how long it is pressed. If the
key is pressed for less than one second, the parameters are switched. If the
key is pressed for one second minimum, the menu display appears. In key
operations from here on, press the key" refers to pressing the key for less
than one second.
For details on switching of parameters and menu display items, see page
1 10.
Each press of key increments or advances the values or settings on the
No.2 display, while each press of the
values or settings on the No.2 display.
Functions vary, for example, when the
neously with the key, or a key is held down continuously. For details,
see page 1 10. Also, chapters 3 and 4 describe examples using various key
combinations.
key decrements or returns the
key is held down simulta
RUN/RST