Key Protect - Omron E5EK PROGRAMMABLE TYPE User Manual

CHAPTER 3 BASIC OPERATION
Setting Example
1 second min.
RUN/RST
1 second min.
RUN/RST
3--20
In this example, let's set the parameters as follows:
"Security" "2" (all parameters in modes other than the setup

"Key protect"

"1" (Auto/manual key operation cannot be
switched)
(1) Press the
RUN/RST
mum. The controller enters the protect mode. In the protect mode,
the top parameter in the protect mode "security" is displayed.
Default is "1".
(2) Press the key to change the parameter setting to "2".
(3) Press the key to switch to the "key protect" parameter.
(4) Press the key to change the parameter setting to "1".
(5) Press the and
mum. The display changes to the "PV/Present SP monitor" param-
eter (level 0 mode).
mode are protected)
and keys simultaneously for 1 second mini-
keys simultaneously for 1 second mini-
RUN/RST