Calibration Mode - Omron E5EK PROGRAMMABLE TYPE User Manual

CHAPTER 5 PARAMETERS

Calibration Mode

• The parameters in this mode can be used only when the "security" parameter
(protect mode) is set to "0". When selecting this mode for the first time after the
E5EK-T has left the factory, return the "security" parameter to "0".
• This mode contains the parameters for user calibration of inputs and outputs.
Only parameters relating to input types specified in the "input type" parameter
(setup mode) can be used. Also, related output parameters can be used only when
the communications unit (E53-AKF) is added on.
• To select this mode, press the
to the menu display. If you select [
press the
mode.
• For details on parameters in the calibration mode, see Chapter 7 Calibration.
5--52
key for 1 second minimum. The display changes
key for 1 second minimum, the controller enters the calibration
] using the and keys, and then