Removing Connectors - Mitsubishi Electric MR-J5-HK-KT Series User Manual

Removing connectors

Remove the connectors in the procedure shown below.
Unlocking jigs can also be used to unlock the plug connector. For the unlocking jigs, contact Hirose Electric co., ltd. (Unlocking
jig model: MT50W/RE-MD)
Unlocking/removal
■When unlocking jigs are not used
Unlock the connector by pushing the lever diagonally upward with your fingers.
After pushing the lever up, hold the plug connector and remove it from the receptacle connector.
To push the lever up, allow space around the plug connector.
Lever
■When unlocking jigs are used
Hook the unlocking jig to the lever and lift them, and unlock the connector.
After unlocking the connector, hold the plug connector and remove it from the receptacle connector.
To lift the unlocking jig hooked on the lever, allow space around the plug connector.
Unlocking jig
Lever
6 HK-KT SERIES
136
6.8 Mounting/removing connectors
Lever
Approx. 30 mm
Lever
Unlocking jig