Mitsubishi Electric MR-J5-HK-KT Series User Manual page 4

[Installation/wiring]
WARNING
● To prevent an electric shock, turn off the power and wait for 15 minutes or more (20 minutes or more
for converter units/drive units) before starting wiring and/or inspection.
● To prevent an electric shock, ground the rotary servo motor securely.
● To prevent an electric shock, any person who is involved in wiring should be fully competent to do the
work.
● To prevent an electric shock, do not attempt to wire the rotary servo motor until it has been mounted.
● To prevent an electric shock, do not touch the conductive parts.
[Installation/wiring]
CAUTION
● To prevent injury, do not touch the rotor of the rotary servo motor during operation.
● To prevent injury, transport the products correctly according to their mass.
● To prevent injury when handling the rotary servo motor, do not touch sharp edges such as the sharp
edges of the rotary servo motor and the shaft keyway with bare hands.
[Maintenance]
WARNING
● To prevent an electric shock, any person who is involved in inspection should be fully competent to do
the work.
2