Xante FilmMaker 4 User Manual page 267

Print is blurred on the output.
•
•
Bold print appears shaded on the output.
•
•
Horizontal banding appears on the printed image.
•
•
•
•
•
The density setting may need adjusting. See "Adjusting Print
Density" in chapter 4.
The toner cartridge may need replacing. See "Toner Cartridge"
in chapter 1.
The density setting may need adjusting. See "Adjusting Print
Density" in chapter 4.
The toner cartridge may need replacing. See "Toner Cartridge"
in chapter 1.
Paper, dust, and toner may have accumulated in the printer.
Clean it. See "Cleaning the Printer" in chapter 6. Use the
cassette cover to prevent dust and debris from settling on the
media and getting into the printer.
Media may be damp or otherwise damaged. Make sure it meets
the requirements in "Media Specifications" in chapter 5. If
necessary, replace the media. See "Standard Cassette" and
"Multipurpose Feeder" in chapter 1.
Toner may have settled in the cartridge. Remove and shake it
gently to redistribute the toner. See "Toner Cartridge" in
chapter 1.
The density setting may need adjusting See "Adjusting Print
Density" in chapter 4.
The toner cartridge may need replacing. See "Toner Cartridge"
in chapter 1.
Troubleshooting 8-9