I/O Settings - Xante FilmMaker 4 User Manual

Fig. 2.133 Printer Home Page
2. Select Printer Information: General Information (fig. 2.133). The General
Information window appears (fig. 2.134).
3. Check the desired printer information (fig. 2.134); then, close your browser.

I/O Settings

I/O settings has AppSocket, EtherTalk, IP, LPR, and Parallel options, each of which
displays current printer settings for its network protocol.
1. Go to the printer home page (fig. 2.135). See "Printer Home Page" earlier in
this chapter for details.
Fig. 2.135 Printer Home Page
2. Select Printer Information: I/O Settings (fig. 2.135). The I/O Settings window
appears (fig. 2.136).
3. Select the desired protocol (AppSocket, EtherTalk, IP, LPR, or Parallel) (fig. 2.136); then,
check its settings.
2-62 Macintosh Setupbb
Fig. 2.134 General Information Window
Fig. 2.136 I/O Settings Window