Xante FilmMaker 4 User Manual page 89

1. Go to the printer home page (fig. 2.110). See "Printer Home Page" earlier in
this chapter for details.
Fig. 2.110 Printer Home Page
2. Select Printer Configuration: Print Quality: EP1 (fig. 2.110). The Default EP1
window appears (fig. 2.111).
3. Select the type of media for which you want to set the EPI from the Media Type
drop-down menu (fig. 2.111). Then, Click Change.
4. Select the EPI settings from the EP1: field (fig. 2.111). Options are 0 up to 15.
The default setting depends on the selected media. The default for paper and
film is 10. Then, click Change.
5. Close the browser.
Fuser Temperature
Fuser Temperature allows you to change your printer's default fuser temperature
settings for each media type.
Fig. 2.111 Default EP1 Window
Macintosh Setup 2-53