Xante FilmMaker 4 User Manual page 81

3. Linearize your printer using the following procedure (fig. 2.98).
a. Select the number of the custom gamma curve which you want to create
from the Custom Gamma drop-down menu. Options are 0 through 6;
the factory default is 0. Then, click Change.
b. Select the input source for printing the calibration page from the Input
Tray options.
c. Select the LPI that will achieve 256 levels of gray from the LPI drop-down
menu. Options are from 5 LPI to 210 LPI in increments of 1; the factory
default is 85 LPI.
For 600 dpi, select 85 lpi; for 1200 lpi, select 106 lpi, for 2400 lpi, select 133 to 150 lpi.
Any lpi may be used; measure the lpi that is to be used for final output.
d. Select the desired resolution. Options are 600 dpi and 1200 dpi; also, if
you have the 2400 dpi upgrade is installed on your system, 2400 dpi will
appear.
e. Select Calibration Page and click Print. A calibration page prints.
Fig. 2.99 Sample Calibration Page
Macintosh Setup 2-45