3.
Select the desired protocol (AppSocket, EtherTalk, IP, IPP, LPR, Parallel, or
USB) (fig. 3.144); then, check its settings.
a.
The AppSocket Information Page (fig. 3.145) lists On, Type, Enabled,
Interpreter, PrinterControl, and OutputDevice settings.
Fig. 3.145 AppSocket Information Page
b.
The EtherTalk Information Page (fig. 3.146) lists On, Type, Enabled,
HasNames, Interpreter, EtherTalkType, EtherTalkZone,
EthernetAddress, DelayedOutputClose, Printer Controller,
OutputDevice, and Filtering settings.
c.
The IP Information Page (fig. 3.147) lists On, Type, IPAddress,
NetworkAddress, GatewayAddress, BroadcastAddress,
IPAddressDynamic, TransmitEncapsulation, and Physical settings.
Fig. 3.147 IP Information Page
d.
The IPP Information Page (fig. 3.148) lists On, Type, Enabled,
Interpreter, DelayedOutputClose, PrinterControl, HasNames, and
OutputDevice settings.
Fig. 3.146 EtherTalk Information Page
Fig. 3.148 IPP Information Page
PC Setup 3-67