Chapter 7 - Options; Introduction; Printer Options; Paper Handling Options - Xante FilmMaker 4 User Manual

Chapter 7 - Options

Introduction

This chapter describes available printer options and installation for those that are user
installable.

Printer Options

You can order controller board upgrades and paper handling options to enhance your
printer's performance. The following chart lists options and their types of installation.
Option
2400 DPI Resolution
Internal IDE hard disk
NEIT
Paper feeder
RAM upgrades
Factory installable options ordered with your printer are installed before the printer is
shipped. To order options, call XANTÉ at 800-926-8839 (US and Canada) from 7:00
a.m. until 6:00 p.m. Central Standard Time Monday through Friday, or call your
XANTÉ vendor. If it is a factory upgrade, you will be given an RMA (Return Material
Authorization) number and shipping instructions.

Paper Handling Options

You can add up to two optional paper cassette feeders to your printer to increase input
capacity for standard paper to approximately 1,650 sheets.

Paper Cassette Feeder

This section describes installing and removing a paper cassette feeder. Cassette feeders
support the same paper cassettes as the printer's built-in paper feeder. See "Standard
Cassette" in chapter 1 and "Media Sources" in chapter 5.

Installing the Paper Cassette Feeder

1. Unpack the paper cassette feeder from the shipping carton. Remove all plastic,
tape, and stabilizing material. Save the carton and packing material to use for
storing the feeder.
The package should contain the following items:
• Feeder unit • Paper Cassette with cover
Type of Installation
Factory or user
Factory or user
Factory or user
User only
Factory or user
• 2 IOT screws (fig. 7.3)
Options 7-1