Xante FilmMaker 4 User Manual page 189

c. Select the resolution which you will use to print the final output in the
printer front panel GRAPHIC: DPI menu.
d. Click Print Calibration Page (fig. 3.168). The calibration page shows the
printer's performance using no gamma curve correction (fig. 3.169).
Print only one calibration page (using the Print Calibration Page button) at the
beginning of the calibration process. Printing this page again later in the process resets
the calibration, cancelling any linearization you have already done.
Fig. 3.169 Sample Calibration Page
6. Use your densitometer to get density measurements for the calibration page
you printed.
Like any other precision instrument, the densitometer must be calibrated before each
use. Refer to its documentation for instructions on calibrating and using the
densitometer.
7. Click Enter Curve/Linearize (fig. 3.170). The Densitometer Data Entry window
appears (fig. 3.171).
PC Setup 3-77