1.
Go to the printer home page (fig. 2.102). See "Printer Home Page" earlier in
this chapter for details.
Fig. 2.102 Printer Home Page
2.
Select Printer Configuration: PostScript: Margins (fig. 2.102). The PostScript
Margins window appears (fig. 2.103).
3.
Check and adjust the PostScript margins if necessary.
a.
Click Update/Print. An alignment test page prints (fig. 2.104).
Fig. 2.104 Sample Alignment Test Page
b.
Turn the test page so that the -x is to the left and the -y is at the top of the
crossed lines.
c.
Check the current settings listed on the test page. The factory default is
x=0, y=0, which should cause each line to print 1" (25.4 mm) from the
page's edges.
2-48 Macintosh
Setupbb
Fig. 2.103 PostScript Margins Window