General Information - Xante FilmMaker 4 User Manual

1. Go to the printer home page (fig. 2.131). See "Printer Home Page" earlier in
this chapter for details.
Fig. 2.131 Printer Home Page
2. Select Printer Information: Diagnostic Information (fig. 2.131). The Diagnostic
Information window appears (fig. 2.132).
3. Check the right side of the window (fig. 2.132) to determine the condition of
your printer's E
2
If the E Prom condition is good, you don't have to do anything; if it is bad or missing,
contact XANTÉ Technical support.
4. Close your browser.

General Information

The General Information option lists miscellaneous printer details. These include the
product name, PostScript version, current firmware revision, boot RAM version,
RAM size, engine speed, page count, and PostScript margin settings as well as whether
the startup-page and low toner page printing is enabled (on) or disabled (off).
1. Go to the printer home page (fig. 2.133). See "Printer Home Page" earlier in
this chapter for details.
Fig. 2.132 Diagnostic Information Window
2 Prom.
Macintosh Setup 2-61