Printing Transparencies - Xante FilmMaker 4 User Manual

• Use only labels that are rated as "laser safe." Do not use label sheets with exposed
adhesives (such as partially used sheets or sheets on which the adhesive has seeped
through to the surface).
• Use the Cool fuser temperature setting when printing labels.

Printing Transparencies

Always use the multipurpose feeder, following the procedure in chapter 1, the media
specifications earlier in this chapter, and these guidelines when printing
transparencies.
• Avoid handling transparencies excessively to prevent fingerprints and scratches.
• Keep the paper path clean (see chapter 6); dust or dirt can scratch transparencies
and reduce print quality.
• Load fewer transparencies if jams occur. The weight of a stack of transparencies
could cause the sheets to stick together.
• Remove each transparency as it is printed to help prevent static buildup.
• Do not fan transparencies. This causes static buildup which can cause jams.
• Use the Cool fuser temperature setting when printing transparencies.
5-10 Media: Selecting, Handling, and Printing
◊◊◊