Printer Information; Diagnostic Information - Xante FilmMaker 4 User Manual

2. Select Printer Configuration: Trays and Media: Media Types (fig. 2.127). The
Media Types window appears (fig. 2.128).
3. Select the desired media type for the input source (fig. 2.128). Options are
Paper (the factory default), Transparency, Cover Stock Label Stock, Matte Film,
Clear Film, Heavy Paper, and UserDef (User Defined) 1 through 5. Then, click
Change.
If an optional cassette is installed, you can designate the type of media for it.
4. Close your browser.
You also can configure the media type through your printer's front panel. See "Media
Types" in chapter 4 for details.

Printer Information

Printer Information options allow you to access printer diagnostic, general, I/O
setting, and option information.
1. Go to the printer home page (fig. 2.129). See "Printer Home Page" earlier in
this chapter for details.
Fig. 2.129 Printer Home Page
2. Select Printer Configuration: Printer Information (fig. 2.129). Printer
Information Options appear (fig. 2.130).
The Printer Information options include Diagnostic Information, General
Information, I/O Settings, and Installed Options.

Diagnostic Information

The Diagnostic Information option allows you to check your printer's E-Prom's status.
2-60 Macintosh Setupbb
Fig. 2.130 Printer Information Options.