Xante FilmMaker 4 User Manual page 273

The multipurpose feeder does not open to a 90° angle. To prevent damage, do not
exert strong pressure or place heavy objects on the feeder.
3. Remove all media from the multipurpose feeder (fig. 8.4).
Fig. 8.4 Remove Media from Multipurpose
Feeder
4. Remove any jammed media from the multipurpose feeder (fig. 8.5).
5. Remove the cassette from the printer.
a. Pull the cassette straight out until it stops (fig. 8.6).
Fig. 8.6 Pull Out Cassette
b. Lift up slightly; then, pull the cassette from the printer (fig. 8.7).
Fig. 8.5 Remove Media Jam from Multipurpose
Feeder
Fig. 8.7 Lift up and Pull out Cassette
Troubleshooting 8-15