Reconfiguring The Ppd After Adding Options - Xante FilmMaker 4 User Manual

Fig. 3.56 Standard TCP/IP Window
14. Enter your printer's IP address and click Next. The Standard Network window
appears (fig. 3.57).
15. Select Standard Generic Network Card (fig. 3.57); then, click Next. When
complete, click Finish on the next window.
16. Close the window and the Printer Properties window reappears (fig. 3.53).
Click Apply to assign the printer name to the IP address.

Reconfiguring the PPD after Adding Options

If you change options such as installing an optional feeder and tray or a memory
upgrade, you need to reconfigure the PPD to reflect the change(s).
The optional feeder and tray upgrade is used as an example for this procedure.
To update the PPD configuration
1. Select Start: Settings: Printers (Windows 98/Me) or select Start: Settings:
Printers and Faxes (Windows NT/2000/XP). The Printers window (Windows
98/Me) or Printers and Faxes window (Windows NT/2000/XP) appears (figs.
58 and 59).
3-28 PC Setup
Fig. 3.57 Standard Network Window