Reassembling The Printer - Xante FilmMaker 4 User Manual

Reassembling the Printer

1. Insert the toner cartridge's pins into the printer's guide channels. Slide the cartridge
into the printer until it stops, making sure it is seated properly (fig. 8.22). See
"Toner Cartridge" in chapter 1.
Fig. 8.22 Reinstall Toner Cartridge
2. Reload the paper cassette(s), if necessary, and reinsert into the paper feeder(s)
(fig. 8.23). See "Standard Cassette" in chapter 1.
3. Close and latch the top cover (fig. 8.24).
Fig. 8.24 Close Top Cover
4. Reload the multipurpose feeder, if necessary. Close the multipurpose feeder
cover if the media fits completely inside the tray. See "Multipurpose Feeder" in
chapter 1.
If the printer was turned off to clear media jam, turn on the printer before loading the
multipurpose feeder.
5. Verify that READY/IDLE appears in the front panel window.
8-20 Troubleshootingbb ______________________________________________________
Fig. 8.23 Reinstall Paper Cassette(s)