Xante FilmMaker 4 User Manual page 72

Other Special Menu Options
We recommend that you manually reboot your printer or use your system Special:
Restart option instead of using the Clear Font Cache or Restart Printer options in the
Special menu. See the PostScript Reference Language Manual about the Use Different
Password option.
PS Files Folder
The PS Files folder on the XANTÉ Utilities CD-ROM contains Adobe PostScript files.
These files can help you in such areas as keeping track of your printer's status,
performing specific functions, and printing font samples. Use Adobe Downloader to
download these files to your printer; see "Using Adobe Downloader" earlier in this
chapter for details.
Accelafont.ps allows you to set the percentage of ramdisk available for the Font
Accelerator feature.
D.PS contains a Control-D (PostScript's end-of-job marker) for use with applications
that do not send a PostScript end-of-file.
Description.pdf contains an overview of the files in the PS Files folder. This file can be
printed using Adobe Acrobat 3.0 or later.
DHCPOFF.ps allows you to disable the DHCP protocol.
DHCPON.ps allows you to enable the DHCP protocol.
Factory.ps resets the printer parameters to factory defaults.
Fonts.ps prints a list of the fonts resident on the printer.
Fontsamp.ps prints samples of Adobe PostScript 3 fonts resident on XANTÉ
PostScript 3 printers.
Initdisk.ps file initializes the hard disk installed in your printer.
You must initialize a hard disk before it can be used to store downloaded fonts;
factory installed disks are initialized already and ready to be used. Initializing a disk
erases all information stored on the disk.
Netduplex.ps is not for use with the FilmMaker 4 printer.
Netpgoff.ps allows you to disable printing the network page which lists protocol
settings for EtherTalk, IP, IPP, and LPR as well as Ethernet physical settings.
2-36 Macintosh Setupbb