Tray Chaining - Xante FilmMaker 4 User Manual

Load envelopes short edge first in the envelope cassette and the multipurpose feeder.
Load envelopes flap closed in the envelope cassette or flap open in the multipurpose
feeder to provide a flatter address area print surface.
Load media in the cassettes and multipurpose feeder print side up, leading edge to the
back of the printer. Most media packages indicate the print side. Use the following
chart to determine alignment for standard paper sizes in the universal cassette and
multipurpose feeder.
Media
Size
A3
A4
A5
B4
B5
Legal
Ledger
Letter
Executive
Statement
Envelopes
Oversize**
* Short = Short Edge First, Long = Long Edge First
** Oversize paper = 12.00" x 17.25" (306 mm x 439 mm) to 13.00" x 18.50" (330
mm x 470 mm)

Tray Chaining

Tray chaining directs the printer to automatically switch to another source for media
when the current source is empty. You can chain to all paper cassettes and the
multipurpose feeder.
Use the following guidelines and the procedure in "Tray Selection Options" in chapter
4 when tray chaining.
• All selected media sources must contain the same size media. If the printer detects
a different size media when it switches to a new tray, a Paper Out message
appears.
5-6 Media: Selecting, Handling, and Printing
Universal Multipurpose
Cassette Feeder
Short Short
Long Long
Long Long
Short Short
Long Long
Short Short
Short Short
Long Long
Long Long
Long Long
N/A Short
Short Short