Xante FilmMaker 4 User Manual page 171

2. Select Printer Configuration: Print Quality: Fuser Temperature (fig. 3.120). The
Fuser Temperature window appears (fig. 3.121).
3. Select the desired media type for the input source (fig. 3.121). Options for the
media type are Paper, Heavy Paper, Cover, Transparency, Labels, and UserDef
(User Defined) 1 through 5; Paper is the factory default. Then, click Change.
4. Select the desired level of fuser temperature. Temperature increases as the
options increase from 0-none to 15-hot and the default depends upon the
selected media. Select 0-none or 1 when printing Myriad film, envelopes, and
paper. Select hotter settings for heavy paper, heavy film, and Myriad plates.
Then, click Change.
5. Close your browser.
NEIT (Negative Enhanced Imaging Technology)
NEIT is a laser power setting that is used for negative prints. Choosing a lower setting
increases laser power and causes the output to be darker. Choosing a higher setting
decreases laser power and cause the output to be lighter. The NEIT feature allows you
to change your default NEIT settings for each media type. See "Negative Enhanced
Imaging Technology (NEIT)" in chapter 4 for more details.
This NEIT feature can be used only if you are printing a negative to Matte Film.
1. Go to the printer home page (fig. 3.?122). See "Printer Home Page" earlier in
this chapter for details.
Fig. 3.122 Printer Home Page
2. Select Printer Configuration: Print Quality: NEIT (fig. 3.122). The Default
NEIT Settings window appears (fig. 3.123).
Fig. 3.123 Default NEIT Settings Window
PC Setup 3-59