Xante FilmMaker 4 User Manual page 134

1. Insert the XANTÉ Utilities CD-ROM into your PC. XANTÉ Utilities Installer
should launch automatically. If not, select Start: Run: Install/xt_prinst.exe. The
XANTÉ Utilities Main window appears (fig. 3.39).
Fig. 3.39 XANTÉ Utilities Main Window
2. Click Install Printer (fig. 3.39). The Installation Preferences window appears
(fig. 3.40).
3. Make the following selections in the Installation Preferences window (fig. 3.40).
a. Select your printer from the Select Product drop-down menu.
b. Select the appropriate program(s) for which you want to download the
drivers from the Application Drivers section.
Even if you are installing this printer to a Network, you must first install as a Parallel
Connection. This is to ensure you can configure the printer's IP address, Subnet
address, and Gateway address.
c. Click OK; if you chose an application in step 3b, a window appears asking
if you want to perform a network installation. Select Yes to continue
installation.
Fig. 3.41 Destination Location Window
3-22 PC Setup
Fig. 3.40 Installation Preferences Window