Xante FilmMaker 4 User Manual page 193

Fig. 3.174 AGC Setup Window
2. Make sure that the same type of media you will use for final printing is loaded
in the printer.
3. Select the media type you are using from the Media Type drop-down menu.
Each media type can only have one set of options. For example, if you calibrate for
8.5" x 11" (letter) paper, choose Paper as your media type. If you also calibrate for 11"
x 17" (tabloid) paper, choose User-defined 1 as your media type.
4. Check Options to make sure the paper (media) source and print settings are
correct. If any of the settings are incorrect, click Change Options; when the
More X-ACT Advanced Setup window appears (fig. 3.176), make the necessary
changes.
Fig. 3.176 More X-ACT Advanced Setup Window
Fig. 3.175 More X-ACT Window
PC Setup 3-81