Xante FilmMaker 4 User Manual page 80

3. Select the desired DPI for your printer from the Default DPI drop-down menu
(fig. 2.96). Standard options are 600 x 600 DPI and 1200 x 1200 DPI; if the 2400
dpi upgrade is installed on your printer, then 2400 x 2400 DPI also appears in
the drop-down menu.
4. Click Change. Then, close your browser.
You also can select the DPI through the printer's front panel. See "Resolution Options
(DPI)" in chapter 4 for details.
Linearization
Linearization allows you to create and download custom curves to your printer. Seven
different custom gamma curves can be created using this process.
You must use a densitometer capable of measuring dot area for the linearization process.
A densitometer, like any other precision instrument, must be calibrated before each
use. Refer to your densitometer's documentation for instructions on calibrating and
using the densitometer.
1. Go to the printer home page (fig. 2.97). See "Printer Home Page" earlier in this
chapter for details.
Fig. 2.97 Printer Home Page
2. Select Printer Configuration: PostScript: Linearization (fig. 2.97). The
Linearization window appears (fig. 2.98).
2-44 Macintosh Setupbb
Fig. 2.98 Linearization Window